How to Unblock Sarawak Report and Other ”Ahem Ahem” Sites

Sarawak Report Unblock-compressed

Important: Before you start

Before you change your DNS settings to use Google Public DNS, be sure to write down the current server addresses or settings on a piece of paper. It is very important that you keep these numbers for backup purposes, in case you need to revert to them at any time.

How to change Google’s DNS for Windows (Just follow these simple steps. If you can’t follow these steps, I suggest you go back to primary school, take the test, graduate with UPSR and then come back and try again):

  1. Go to the Control Panel.
  2. Click Network and Internet > Network and Sharing Center > Change adapter settings.
  3. Select the connection for which you want to configure Google Public DNS. For example:
    • To change the settings for an Ethernet connection, right-click Local Area Connection > Properties.
    • To change the settings for a wireless connection, right-click Wireless Network Connection > Properties.

    If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

  4. Select the Networking tab. Under This connection uses the following items, select Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6) and then click Properties.
  5. Click Advanced and select the DNS tab. If there are any DNS server IP addresses listed there, write them down for future reference, and remove them from this window.
  6. Click OK.
  7. Select Use the following DNS server addresses. If there are any IP addresses listed in the Preferred DNS server orAlternate DNS server, write them down for future reference.
  8. Replace those addresses with the IP addresses of the Google DNS servers:
    • For IPv4: 8.8.8.8 and/or 8.8.4.4.
    • For IPv6: 2001:4860:4860::8888 and/or 2001:4860:4860::8844.
  9. Restart the connection you selected in step 3.
  10. Test that your setup is working correctly; see Test your new settings below.
  11. Repeat the procedure for additional network connections you want to change.

If you still don’t know how, watch this guy with a funny accent explain on how to change Google’s DNS for Windows:

How to change Google’s DNS for MAC (Apple Computer Bro – With the Apple Logo on the Laptop, iPhone punya company):

DNS settings are specified in the Network window.

Example: Changing DNS server settings on Mac OS 10.5

  1. Click Apple > System Preferences > Network.
  2. If the lock icon in the lower left-hand corner of the window is locked, click the icon to make changes, and when prompted to authenticate, enter your password.
  3. Select the connection for which you want to configure Google Public DNS. For example:
    • To change the settings for an Ethernet connection, select Built-In Ethernet, and click Advanced.
    • To change the settings for a wireless connection, select Airport, and click Advanced.
  4. Select the DNS tab.
  5. Click + to replace any listed addresses with, or add, the Google IP addresses at the top of the list:
    • For IPv4: 8.8.8.8 and/or 8.8.4.4.
    • For IPv6: 2001:4860:4860::8888 and/or 2001:4860:4860::8844.
  6. Click Apply > OK.
  7. Test that your setup is working correctly; see Test your new settings below.
  8. Repeat the procedure for additional network connections you want to change.

How to change Google’s DNS for LINUS (I bet you never seen before):

In most modern Linux distributions, DNS settings are configured through Network Manager.

Example: Changing DNS server settings on Ubuntu

  1. Click System > Preferences > Network Connections.
  2. Select the connection for which you want to configure Google Public DNS. For example:
    • To change the settings for an Ethernet connection, select the Wired tab, then select your network interface in the list. It is usually called eth0.
    • To change the settings for a wireless connection, select the Wireless tab, then select the appropriate wireless network.
  3. Click Edit, and in the window that appears, select the IPv4 Settings or IPv6 Settings tab.
  4. If the selected method is Automatic (DHCP), open the dropdown and select Automatic (DHCP) addresses onlyinstead. If the method is set to something else, do not change it.
  5. In the DNS servers field, enter the Google Public DNS IP addresses, separated by a space:
    • For IPv4: 8.8.8.8 and/or 8.8.4.4.
    • For IPv6: 2001:4860:4860::8888 and/or 2001:4860:4860::8844.
  6. Click Apply to save the change. If you are prompted for a password or confirmation, type the password or provide confirmation.
  7. Test that your setup is working correctly; see Test your new settings below.
  8. Repeat the procedure for additional network connections you want to change.

If your distribution doesn’t use Network Manager, your DNS settings are specified in /etc/resolv.conf.

Example: Changing DNS server settings on a Debian server

  1. Edit /etc/resolv.conf:
    sudo vi /etc/resolv.conf
    
  2. If any nameserver lines appear, write down the IP addresses for future reference.
  3. Replace the nameserver lines with, or add, the following lines:For IPv4:
    nameserver 8.8.8.8
    nameserver 8.8.4.4
    

    For IPv6:

    nameserver 2001:4860:4860::8888
    nameserver 2001:4860:4860::8844
    
  4. Save and exit.
  5. Restart any Internet clients you are using.
  6. Test that your setup is working correctly; see Test your new settings below.

Additionally, if you are using DHCP client software that overwrites the settings in /etc/resolv.conf, you will need to set up the client accordingly by editing the client’s configuration file.

Example: Configuring DHCP client sofware on a Debian server

  1. Back up /etc/resolv.conf:
    sudo cp /etc/resolv.conf /etc/resolv.conf.auto
    
  2. Edit /etc/dhcp3/dhclient.conf:
    sudo vi /etc/dhcp3/dhclient.conf
    
  3. If there is a line containing domain-name-servers, write down the IP addresses for future reference.
  4. Replace that line with, or add, the following line:For IPv4:
    prepend domain-name-servers 8.8.8.8, 8.8.4.4;
    

    For IPv6:

    prepend domain-name-servers 2001:4860:4860::8888, 2001:4860:4860::8844;
    
  5. Save and exit.
  6. Restart any Internet clients you are using.
  7. Test that your setup is working correctly; see Test your new settings below.

How to change Google’s DNS for Mobile Devices: 

DNS servers are typically specified under advanced wi-fi settings. However, as every mobile device uses a different user interface for configuring DNS server settings, we provide only a generic procedure below. For more information, please consult your mobile provider’s documentation.

To change your settings on a mobile device:

  1. Go to the screen in which wi-fi settings are specified.
  2. Find the screen in which DNS server settings are specified.
  3. If there are IP addresses specified in the fields for the primary and seconday DNS servers, write them down for future reference.
  4. Replace those addresses with the Google IP addresses:
    • For IPv4: 8.8.8.8 and/or 8.8.4.4.
    • For IPv6: 2001:4860:4860::8888 and/or 2001:4860:4860::8844.
  5. Save and exit.
  6. Test that your setup is working correctly; see Test your new settings below.

Switch back to your old DNS Settings:

If you had not previously configured any customized DNS servers, to switch back to your old settings, in the window in which you specified the Google IP addresses, select the option to enable obtaining DNS server addresses automatically, and/or delete the Google IP addresses. This will revert your settings to using your ISP’s default servers.

If you need to manually specify any addresses, use the procedures above to specify the old IP addresses.

If necessary, restart your system.

Source



Written by FunnyMalaysia

The leading media company in Malaysia for the social age, intensely focused on delivering high quality original reporting, insights and viral contents.